AP OSPF Neighbors

OSPF establishes neighbor relationships to exchange routing updates with other routers. An access point supporting OSPF sends hello packets to discover neighbors and elect a designated router. The hello packet includes link state information and list of neighbors. OSPF is savvy with layer 2 topologies. If on a point-to-point link, OSPF knows it is sufficient, and the link stays up. If on a broadcast link, the router waits for election before determining if the link is functional.

To view OSPF neighbor statistics:

  1. Select the Statistics menu from the Web UI.
  2. Expand the System node from the navigation pane (on the left-hand side of the screen). The System node expands to display the RF Domains created within the managed network.
  3. Expand an RF Domain node, and select one of it's connected access points. The access point's statistics menu displays in the right-hand side of the screen, with the Health tab selected by default.
  4. Expand the OSPF menu.
  5. Select the Neighbor Info tab.
    The Statistics > AP > OSPF > Neighbor Info screen is displayed.
    Click to expand in new window
    GUID-4FB4DA52-8315-4CE3-8BD6-F591129B7B2B-low.png
    This screen describes the following:
    Router ID

    Displays the router ID assigned for this OSPF connection. The router is a level three Internet Protocol packet switch. This ID must be established in every OSPF instance. If not explicitly configured, the highest logical IP address is duplicated as the router identifier. However, since the router identifier is not an IP address, it does not have to be a part of any routable subnet in the network.

    Neighbor Priority

    Displays each listed neighbor's priority in respect to becoming the designated router managing the OSPF connection. The designated router is the router interface elected among all routers on a particular multi-access network segment.

    IF Name

    Lists the name assigned to the router interface used to support connections amongst OSPF enabled neighbors.

    Neighbor Address

    Lists the IP address of the neighbor sharing the router interface with each listed router ID.

    Request Count

    Lists the connection request count (hello packets) to connect to the router interface, discover neighbors and elect a designated router

    Retransmit Count

    Lists the connection retransmission count attempted in order to connect to the router interface, discover neighbors and elect a designated router. A DR (designated router) is the router interface elected among all routers on a particular multi-access network segment, generally assumed to be broadcast.

    Dead Time

    Lists the dead time between neighbors in the network topology that are currently utilizing the listed router ID.

    Self Neighbor State

    Displays the self-neighbor status assessment used to discover neighbors and elect a designated router.

    Source Address

    Displays the single source address used by all neighbor routers to obtain topology and connection status. This form of multicasting significantly reduces network load.

    Summary Count

    Routes that originate from other areas are called summary routes. Summary routes are not flooded in a totally stubby or NSSA totally stubby area.

  6. Select Refresh to update the statistics counters to their latest values.