AP Network Route Entries

The Route Entries screen displays the destination subnet, gateway, and interface for routing packets to a defined destination. When an existing destination subnet does not meet the needs of the network, add a new destination subnet, subnet mask and gateway.

To view route entries:

  1. Select the Statistics menu from the Web UI.
  2. Expand the System node from the navigation pane (on the left-hand side of the screen). The System node expands to display the RF Domains created within the managed network.
  3. Expand an RF Domain node, and select one of it's connected access points. The access point's statistics menu displays in the right-hand side of the screen, with the Health tab selected by default.
  4. Expand the Network menu from the left-hand side of the UI.
  5. Select Route Entries.
    The Statistics > AP > Network > IPv4 Route Entries screen is displayed.
    Click to expand in new window
    GUID-87CB009A-1215-4FD6-B126-91DD822AA7D5-low.png
    The IPv4 Route Entries screen provides the following information:
    Destination Displays the IPv4 formatted address of the destination route address.
    Distance Lists the hop distance to a desired route. Devices regularly send neighbors their own assessment of the total cost to get to all known destinations. A neighboring device examines the information and compares it to their own routing data. Any improvement on what‘s already known is inserted in that device‘s own routing tables. Over time, each networked device discovers the optimal next hop for each destination.
    Route Lists the IPv4 formatted IP address used for routing packets to a defined destination.
    Flags The flag signifies the condition of the direct or indirect route.
    Gateway Displays the gateway IP address used to route packets to the destination subnet.
    Interface Displays the name of the controller interface or VLAN utilized by the destination subnet.
    Metric Lists the metric (or cost) of the route to select (or predict) the best route. The metric is computed using a routing algorithm, and covers information bandwidth, network delay, hop count, path cost, load, MTU, reliability, and communication cost.
  6. Select the IPv6 Route Entries tab to review route data for IPv6 formatted traffic.
    The IPv6 Route Entries stats display in the right-hand pane.
    Click to expand in new window
    GUID-91974EF2-6BFD-4015-9D54-64E63C05B67B-low.png

    The IPv6 Route Entries screen provides the following information:

    Destination Displays the IPv6 formatted address of the destination route address. IPv6 addresses are composed of eight groups of four hexadecimal digits separated by colons.
    Gateway Displays the gateway IP address used to route packets to the destination subnet.
    Interface Displays the name of the controller interface or VLAN utilized by the destination subnet.
    Flag The flag signifies the condition of the direct or indirect route.
  7. Select Refresh to update the display to the latest values.