OSPF - Interface Settings

1. Select the Interface Settings tab.

   The OSPF interface configuration displays.

   

   OSPF - Interface Main Screen

   
2. Review existing Interface Settings.

   Name	Displays the name defined for the interface configuration.
   Type	Displays the type of interface.
   Description	Lists each interface‘s 32 character maximum description.
   Admin Status	A green check mark defines the interface as active and currently enabled with the profile. A red “X” defines the interface as currently disabled and not available for use.
   VLAN	Lists the VLAN IDs set for each listed OSPF route virtual interface.
   IP Address	Displays the IP addresses defined as virtual interfaces for dynamic OSPF routes. Zero config and DHCP can be used to generate route addresses, or a primary and secondary address can be manually provided.