Assigning an IPv6 address to a VLAN
Assign an IPv6 address to a VLAN.
Procedure
- In the navigation pane, expand the folders.
- Click VLANs.
- Click the Basic tab.
- Select a VLAN interface.
- Click IPv6.
- Click the IPv6 Addresses tab.
- Click Insert.
- Type the IPv6 address and length in the fields.
- Click Insert.
- Click Apply.
IPv6 Addresses field descriptions
Use the data in the following table to use the IPv6 Addresses tab.
|
Name |
Description |
|---|---|
|
Interface |
Identifies the address to which the address is assigned. |
|
Addr |
Specifies an IP address that is associated with a VLAN. |
|
AddrLen |
Specifies the prefix address length value for this address. |
|
Type |
Specifies the type of address: either unicast or anycast. |
|
Origin |
Specifies the origin of the address as one of the following:
|
|
Status |
Shows the status of the address and if it can be used for communication. |
|
Created |
Shows the time this address entry was created. |
|
LastChanged |
Shows the time this address entry was last updated. |