Configure a Web Server Certificate

Note

This procedure does not apply to VSP 8600 Series.

About this task

Use this task to configure a web server certificate.

Procedure

Enter Global Configuration mode:

enable

configure terminal
Configure the Certificate Authority for the installed digital certificate:

web-server certificate ca-name <1-45>
Configure the subject identity label to be used

web-server certificate cert-subject-name <1-45>

Example

Display the web server certificate information:

Switch:1(config)#web-server certificate cert-subject-name 823
Switch:1(config)#1 2021--2--2T14:35:38.865z Switch CP1 - 0x003z8604 - 0000000
GlobalRouter DIGITALCERT INFO Digital Certificate Module: Configuration Saved 
1 2021--2--2T14:35:38.865z Switch CP1 Switch CP1 - 0x00040601 - 0000000 Global Router
WEB INFO HTPS: Using the CA Signed Server Cert

Variable Definitions

Use the data in the following table to use the web-server certificate command


Variable	Value
ca-name `WORD<1-45>`	Specifies the name of the Certificate Authority.
ca-subject-label `WORD<1-45>`	Specifies the name of the local certificate used.