Managing UDP forwarding protocols

About this task

The switch configures the following protocols, by default:

  • Time Service

  • Terminal Access Controller Access Control System (TACACS) Service

  • Domain Name System (DNS)

  • Trivial file transfer protocol (TFTP)

  • Network Basic Input/Output System (NetBIOS) NameSrv

  • NetBIOS DataSrv

You can use these protocols to create forwarding entries and lists but you cannot delete them; you can add or remove other protocols to the list of protocols.

Procedure

  1. In the navigation tree, expand the following folders: Configuration > IP.
  2. Click UDP Forwarding.
  3. Click Insert.
  4. In the PortNumber field, type a UDP port number.

    This number defines the UDP port used by the server process as its contact port. The range is from 1 to 65535 and cannot be one of the UDP port numbers or a number previously assigned.

  5. In the Name field, type a name for the protocol.
  6. Click Insert.

    The protocol is added to the Protocol table. After you create a protocol, you cannot change its name or number.

Protocols field descriptions

Use the data in the following table to use the Protocols tab.

Name

Description

PortNumber

Defines the UDP port (1 to 65535).

Name

Specifies an administratively assigned name for this list (0 to 15 characters).
9037588-00 Rev AA