Creating multiple CLI users

Note

Note

DEMO FEATURE - Multiple CLI Users Per Role is a demonstration feature on some products. Demonstration features are provided for testing purposes. Demonstration features are for lab use only and are not for use in a production environment. For more information on feature support, see Fabric Engine and VOSS Feature Support Matrix.

You can create up to seven new CLI users on the switch, in addition to the three default CLI users. The username must be unique. If you enable the hsecure flag, password complexity rules apply to all users.

Before you begin

You must use an account with read-write-all privileges to create new CLI users.

About this task

Note

Note

When a new CLI user is created, the specified username and access level cannot be changed later.

Procedure

  1. Enter Global Configuration mode:

    enable

    configure terminal

  2. Create a new CLI user:

    username add {<WORD 1–20> level [ro|rw|rwa] enable}

  3. Enter a password.
  4. Enter the password a second time.

Example

Create a new CLI user:
Switch:1>enable
Switch:1#configure terminal
Enter configuration commands, one per line.  End with CNTL/Z.
Switch:1(config)#username add smith level rwa enable
Enter password : *******
Re-enter password : *******
Switch:1(config)#

Variable Definitions

The following table defines parameters for the username command.

Variable

Value

add WORD<1–20>

Specifies the username to create.

enable

Enables the new CLI user.

level <ro | rw | rwa>

Specifies the level assigned to the new CLI user:

  • ro: Read-only level

  • rw: Read-write level

  • rwa: Read-write-all level