Clear ACL Statistics

Clear default ACL statistics if you no longer require previous statistics.

Note

The ACL statistics do not support security action on some hardware platforms.

Procedure

Enter Privileged EXEC mode:

enable
Enter the following command to clear default ACL statistics:

clear filter acl statistics default <acl-id>
Enter the following command to clear global ACL statistics:

clear filter acl statistics global <acl-id>
Enter the following command to clear all ACL statistics:

clear filter acl statistics all
Enter the following command to clear statistics associated with a particular ACL, ACE, or ACE type:

clear filter acl statistics <acl-id> <ace-id> [qos] [security]

Use the information in the following table to use the clear filter acl statistics command.


Variable	Value
`<acl-id>`	Specifies the ACL ID. Use the CLI Help to see the available range for the switch.
`<ace-id>`	Specifies the ACE ID. Different hardware platforms support different ACE ID ranges. Use the CLI Help to see the available range for the switch.