Enable or Disable DHCP Snooping globally

Use the following procedure to enable DHCP Snooping globally. If DHCP Snooping is globally disabled, the switch forwards DHCP reply packets to all required ports, both trusted or untrusted.

Procedure

Enter Global Configuration mode:

enable

configure terminal
Enable DHCP Snooping globally:

ip dhcp-snooping enable
Disable DHCP Snooping globally:

no ip dhcp-snooping enable

Example

Switch:1>enable
Switch:1#configure terminal
Switch:1(config)#ip dhcp-snooping enable

Variable Definitions

The following table defines parameters for the ip dhcp-snooping command.


Variable	Value
enable	Enables or disables DHCP Snooping globally. By default, DHCP Snooping is disabled.