Configure an Auto-sense Data I-SID on a Port

Note

Note

This procedure does not apply to VSP 8600 Series and XA1400 Series.

About this task

Perform this procedure to configure an Auto-sense Data I-SID on a port.

Procedure

  1. In the Device Physical View tab, select a port.
  2. In the navigation pane, expand Configuration > Edit > Port.
  3. Select General.
  4. Select the Interface tab.
  5. For AutoSenseDataIsid, type the data I-SID value. The range is 0 to 15999999.
  6. Select Apply.
9037588-00 Rev AA