Display the Default Configuration File on Fabric IPsec Gateway VM

About this task

Perform this procedure to display the default configuration file on the Fabric IPsec Gateway Virtual Machine (VM).

1. Enter Fabric IPsec Gateway Configuration mode:

   enable

   virtual-service WORD<1-128> console

   

   Note

   Type CTRL+Y to exit the console.

2. Display default configuration file:

   show default-config-file

Example

Displaying default configuration file on Fabric IPsec Gateway VM:

Switch:1> enable
Switch:1# virtual-service figw console
Connected to domain figw
Escape character is ^Y

  <cr>
FIGW> show default-config-file
coupled.cfg