Configure a Management VLAN on a DvR Leaf Node

Note

This procedure does not apply to VSP 8600 Series.

About this task

On a DvR leaf node, you can configure a Management Instance VLAN by specifying the I-SID. Use the following procedure to configure a Management Instance VLAN on a DvR leaf node.

Procedure

Enter Global Configuration mode:

enable

configure terminal
Configure a Management Instance VLAN I-SID:

mgmt vlan i-sid <1-16777215>

Variable Definitions

The following table defines parameters for the mgmt vlan i-sid command.


Variable	Value
1-16777215	Specifies the VLAN I-SID to associate with the management VLAN.