Configuring route redistribution to RIPng
Configure a redistribute entry to announce routes of a certain source protocol type into the RIPng domain, for example, static, RIP, or direct. Use a route policy to control the redistribution of routes.
Before you begin
Enable RIP globally.
Configure a route policy.
Procedure
- In the navigation tree, expand the following folders: Configuration > IPv6.
- Click IPv6 RIPng.
- Click the Redistribute tab.
- Double-click the value in the Enable column that corresponds with the source protocol type you want to enable or disable.
- Select enable or disable from the list.
- Click Apply.
Redistribute field descriptions
Use the data in the following table to use the Redistribute tab.
|
Name |
Description |
|---|---|
|
DstVrfiId |
Specifies the destination VRF ID used in the redistribution. |
|
Protocol |
Specifies the dynamic routing protocol that receives the external routing information. |
|
SrcVrfId |
Specifies the source VRF ID used in the redistribution. |
|
RouteSource |
Specifies the route source protocol for the redistribution entry. |
|
Enable |
Enables (or disables) a RIPng redistribute entry for a specified source type. |