Note
This procedure only applies to the VSP 7400
Series.
About this task
Perform this procedure to display the IS-IS Multi-area SPB IPv6 redistribution configuration for home to remote, remote to home, unicast,
specific Virtual Router Forwarding (VRF) instance, and VRF IDs on the switch.
Procedure
-
To enter User EXEC mode, log on to the
switch.
-
Display the IS-IS Multi-area SPB IPv6 home to remote redistribution configuration:
show isis
multi-area ipv6 redistribute [home-to-remote [vrf WORD<1-16> |
vrfids WORD<0-512>]]
-
Display the IS-IS Multi-area SPB IPv6 remote to home redistribution configuration:
show isis
multi-area ipv6 redistribute [remote-to-home [vrf WORD<1-16> |
vrfids WORD<0-512>]]
-
Display the IS-IS Multi-area SPB IPv6 unicast redistribution configuration:
show isis
multi-area ipv6 redistribute unicast [home-to-remote [vrf
WORD<1-16> | vrfids WORD<0-512>] | remote-to-home [vrf
WORD<1-16> | vrfids WORD<0-512>] | vrf WORD<1-16> |
vrfids WORD<0-512>]]
-
Display the IS-IS Multi-area SPB IPv6 redistribution configuration for VRF instance:
show isis
multi-area ipv6 redistribute [vrf WORD<1-16>]
-
Display the IS-IS Multi-area SPB IPv6 redistribution configuration for VRF ID:
show isis
multi-area ipv6 redistribute [vrfids WORD<0-512>]
Example
Displaying the IS-IS Multi-area SPB IPv6 unicast redistribution
configuration:
Switch:1>show isis multi-area ipv6 redistribute unicast
======================================================================================
ISIS Multiarea Redistribute List for ipv6 unicast - GlobalRouter
======================================================================================
DIRECTION ENABLE RPOLICY
--------------------------------------------------------------------------------------
home-to-remote TRUE Test1
remote-to-home TRUE Test2
