Display Virtual Services Resources

About this task

Perform the following procedure to display the number of remaining virtual services resources on the switch.

Procedure

To enter User EXEC mode, log on to the switch.
Display statistics for all virtual services configured on the switch or a specific virtual service:

show virtual-service statistics [WORD<1-128>]

Example

Switch:1>show virtual-service statistics
==========================================================================
                         Virtual Services
==========================================================================
Virtual Service :        figw
Package App Name :       FabricIPSecGW_VM_master.0.22_20.04
Package Name :           FabricIPSecGW_VM_master.0.22_20.04.ova
Package Version :        0.22

Memory Utilization (Mega Bytes)
  Allocated     Used    Available
  12288        1209     11079

CPU Utilization
  Allocated(# cores)     CPU Utilization (Total %)
           6              12

Disk Utilization
  Primary Disk Size  :   10G

VPort Information:
  Name                   Vlan           Connect Type    Insight Port    NIC Type
  eth0                                   vtd             1/s1
    Guest Intf Name : eth0
    MAC Address     : 42:fd:46:00:00:01
    IPv4 Address    : 0.0.0.0
    IPv6 Address    : fe80:0:0:0:40fd:46ff:fe00:1


Management Status   :    Enabled
Operational Status  :    Running
Uptime  :                0 day(s), 08:49:30
------------------------------------------------------------------------------------------

==========================================================================================
                         Hypervisor Remaining Resources
==========================================================================================
    Number of Cores Remaining:  0
    Total Memory Remaining(M):  147
    Total Disk Remaining(GB):  79