Displaying Fabric Extend over IPsec tunnel status

Use the following procedure to display the Fabric Extend over IPsec tunnel status on the switch.

Procedure

  1. To enter User EXEC mode, log on to the switch.
  2. Display the Fabric Extend over IPsec tunnel status:

    show io logical-intf-ipsec

Example of a Fabric Extend over IPsec tunnel status.

Switch:1> show io logical-intf-ipsec
bash-4.3# ipsec status | grep ESTABLISHED
ipsec1-192.0.2.192[12]: ESTABLISHED 13 hours ago, 192.0.2.193[192.0.2.193]...192.0.2.192[192.0.2.192]
ipsec0-192.0.2.182[11]: ESTABLISHED 13 hours ago, 192.0.2.193[192.0.2.193]...192.0.2.182[192.0.2.182]
9037588-00 Rev AA