View the Foreign SA Cache

View the foreign SA cache to display the (S, G) state the router learns from SA messages.

Before you begin

To perform this procedure on a non-default VRF, you must first change the VRF instance. For information about how to use EDM for a non-default VRF, see Select and Launch a VRF Context View. All parameters might not be available in non-default VRFs.

Procedure

  1. In the navigation pane, expand Configuration > IP.
  2. Select MSDP.
  3. Select the SA-Cache-Records tab.

SA-Cache-Records field descriptions

Use the data in the following table to use the SA-Cache-Records tab.

Name

Description

TypeInformation

Shows the SA cache type. The SA cache type can be local or foreign cache.

GroupAddr

Shows the group IP address of the SA cache entry.

SourceAddr

Shows the source IP address of the SA cache entry.

OriginRP

Shows the RP address of the SA cache entry.

OriginatorAsNumber

Shows the AS number of the originator.

RouteType

Shows the type of route used for Reverse Path Forwarding checking. The value can be rip (1), ospf (2), static (3), bgp (4), isis(5) or none (6).