Configuring an ACE IP destination address

Configure ACE IP destination address entries to have the filter look for specific destination IP addresses.

Before you begin

  • The ACL exists.

  • The ACE exists.

Procedure

  1. In the navigation tree, expand the following folders: Configuration > Security > Data Path.
  2. Click Advanced Filters (ACE/ACLs).
  3. Click the ACL tab.
  4. Select the appropriate ACL.
  5. Click ACE.
  6. Select the appropriate ACE.
  7. Click IP.
  8. Click the Destination Address tab.
  9. Click Insert.
  10. Specify the operation type.
  11. In the IPAddr box, enter the destination IP address.
  12. Click Insert.

Destination Address field descriptions

Use the data in the following table to use the Destination Address tab.

Name

Description

AclId

Specifies the ACL ID.

AceId

Specifies the ACE ID.

Oper

The eq and mask parameters specify an operator for a field match condition: equal to or mask. The mask operator is an implied eq on the mask bits.

IPAddr

Specifies the destination IP address.

OperMask

Specifies the mask value for the destination IP address.
9037588-00 Rev AA