Configuring a UDP port forward entry

Configure a UDP port forward entry to add or remove a port forward entry.

Procedure

Enter either Global Configuration mode or VRF Router Configuration mode for a specific VRF context:

enable

configure terminal

Optional: router vrf WORD<1-16>
Configure a UDP port forward entry:

ip forward-protocol udp portfwd <1–65535> {A.B.C.D}
Confirm your configuration:

show ip forward-protocol udp portfwd [vrf WORD<1-16>] [vrfids WORD<0-512>]

Configure a UDP port forward entry:

Switch:1>enable
Switch:1#configure terminal
Switch:1(config)#ip forward-protocol udp portfwd 150 192.0.2.10

Use the data in the following table to use the ip forward-protocol udp portfwd command.


Variable	Value
<1-65535> {A.B.C.D}	Adds a UDP protocol port to the specified port forwarding list. `1-65535` is a UDP protocol port in the range of 1–65535. A.B.C.D is an IP address in a.b.c.d format. Use the no operator to remove a protocol port forwarding entry and IP address from the list: `no ip forward-protocol udp portfwd <1-65535> <A.B.C.D>`. To configure this option to the default value, use the default operator with this command.
vrf WORD<1-16>	Specifies the name of the VRF.
vrfids WORD<0-512>	Specifies the ID of the VRF.