Variable Definitions

The following table defines parameters for the filter acl ace policer command.

Variable

Value

<acl-id>

Specifies the ACL ID. Use the CLI Help to see the available range for the switch.

<ace-id>

Specifies the ACE ID. Different hardware platforms support different ACE ID ranges. Use the CLI Help to see the available range for the switch.

svc-rate <0-4000000000>

Note:

Exception: only supported on VSP 4900 Series andVSP 7400 Series.

Specifies the rate of the traffic committed to be delivered.

Service rate limit in kbps {0-4000000000}.The granularity is 8 kbps.

peak-rate <8-4000000000>
Note:

Exception: only supported on VSP 4900 Series andVSP 7400 Series.

Specifies the value when exceeded causes packets to drop on ingress.

Peak rate limit in kbps {8-4000000000}.The granularity is 8 kbps.