The SNMP Trap action sends an SNMP notification to your SNMP server if the conditions defined in the filter are met. To select the SNMP Trap action, go to and then select SNMP Trap from the Search Actions.
Note
Before you can use the SNMP Trap action, you must enable SNMP trap. For information on enabling SNMP trap, see Using ADSPadmin to Configure ADSP.
The following fields should be filled:
| Field | Description |
|---|---|
|
Server Address |
Specifies the IP address of your SNMP server. |
|
SNMP Port |
Specifies the port you want to use for SNMP Notifications. |
|
Community String |
Specifies the community string for the receiving SNMP server. The string is a series of characters manipulated as a group, in this instance for SNMP. |
|
Transport |
Specifies the desired transport protocol. Choices are:
Hint: Typically, UDP is the transport for SNMP traps. However, TCP can be useful for tunneling the traps over Secure Socket Layer (SSL). |
|
Max Queue Size |
Specifies the maximum queue size for the notification. Choose a
size from the drop-down menu.
 |
|
Send Time |
Specifies when to send the email by selecting one of the following conditions:
|