Automatic Synchronization

Follow these steps to set up automatic synchronization of your primary and secondary ADSP appliances:

Note

Note

Do not configure the automatic backup time and the automatic synchronization time with the same values.
  1. Enable automatic synchronization by selecting the Designate this as a Secondary (redundant) appliance checkbox to place a checkmark in the box.
  2. Enter the address, port, username, and password as described for manual synchronization.
  3. Select whether you want to synchronize appliance name and/or synchronize mail relay.
  4. Decide how often you want to run the synchronization by selecting One Time Schedule, Intra-Day Schedule, Daily Schedule, Weekly Schedule, or Monthly Schedule from the drop-down menu.

    Depending on the interval you selected in the previous step, fill in the related fields using the following table:

    Interval Action

    One Time Schedule

    Choose a time for the synchronization by selecting a time from the Time drop-down menu. Then, select a day for the synchronization by clicking the Calendar button in the Date field and selecting a date.

    Intra-Day Schedule

    Select a time to begin the synchronization. Then, select a frequency in hours.

    Daily Schedule

    Select a frequency in day, weekdays only, or weekends only. Then, select a time of day.

    Weekly Schedule

    Choose a frequency in days. Then, select a day or multiple days to conduct the synchronization by clicking the checkbox next to the day to place a checkmark in the box.

    Monthly Schedule

    Choose the months that you want to run the synchronization by clicking the checkbox next to the month(s) to place a checkmark in the box(es). Then, select a day of the month to conduct the synchronization. Last, specify a time of day.
  5. Click the Apply button to set the automatic synchronization schedule.
9037079-00