Configure the following information for the external relay server:
| Field | Description |
|---|---|
| Host | The host name of the external relay server. You can also enter the IP address of the server. |
| Protocol | Select the protocol to use when accessing the relay server.
Select from one of
|
| Path | The path on the remote server on which the configuration, firmware, and provisioning information is stored. It is recommended to leave this entry blank or use the root folder (/). |
| Port | The port field is automatically populated. It is dependent on the protocol selected. |
| Username | The user account used to access the remote relay server. |
| Password | The password for the above account. |
If your relay server is a part of the network that uses NAT (Network Address Translation), use the Use a different host address.... field to configure the above details for that server with a NAT address. This configuration is the same as the above, however, the IP address of the relay server will change.