Advanced Search

The Network tab has an advanced search feature that allows you to supply additional criteria to the basic search. Click the Advance Search icon to access the advanced search feature.

With the advanced search feature, you can supply additional information such as:

The name of the device
The IP address of the device
The MAC address of the device
The capabilities of the device (Any, Sensor, Wireless Switch, Wired Switch, or Network Manager selected from a drop-down menu)
The model number of a device or any model.
The SSID of the device
The client type of the device
- Default Type
- MCD
- VoIP Phone
- Laptop
- Employee Laptop
- Employee Phone
- Employee Device
- High Priority Visitor Device
- Visitor Device
- Low Priority Visitor Device
The manufacturer of the device
The source
- All
- Sensor Segment
- Switch
- Authorized AP
- Unknown

You may add additional criteria as needed by clicking the Add Search Criteria link. When the link is clicked, the first additional criteria (Flag) is added.

You can change the added search criteria by clicking the drop-down menu and selecting another criteria. The menu contains criteria that relate to the type of devices being displayed. If you want to use more than one of the listed criteria, you can click the Add Search Criteria link to add the next criteria in the list.

Additional criteria may be added until you added all the search criteria for the type of devices being displayed. Added criteria may be removed by hovering your cursor over the criteria and then clicking the located to the right of the criteria. Additional criteria includes:


Criteria	Description
Flag	Select whether you want to display flagged or un-flagged devices.
Firmware	Supply a firmware version for devices you want to display.
First Seen	Supply a range of first seen hours for devices you want to display.
Last Seen	Supply a range of last seen hours for devices you want to display.
Classification	Select whether you want to display sanction, unsanctioned or neighboring devices.
Channel	Supply a range of channels for devices you want to display.
Signal Strength	Supply a range of signal strengths (in dBm) for devices you want to display.
Sensed Authentication	Select a sensed authentication method from the drop-down menu.
Sensed Encryption	Select a sensed encryption method from the drop-down menu.
Polled Authentication	Select a polled authentication method from the drop-down menu.
Polled Encryption	Select a polled encryption method from the drop-down menu.
Up Time	Supply a range of up time hours for devices you want to display.
Online	Select whether you want to display online or offline devices.
Compliant	Select whether you want to display compliant, non- compliant, or unlicensed devices.

Once you have entered or selected your search criteria, click Search to display devices matching your search criteria.