Client Tracking

In order to activate Wireless Client tracking, you must enable the Enhanced Probe table on the RFSX000 controller. This allows an AP to forward an MU probe request data to the controller.

You must manually enter the MAC address for each Wireless Client that you wish to track into the preferred Wireless Client (MU) list. If you want to track multiple rogue Wireless Clients, you have to input the MAC of each Wireless Client (MU) into the switch, and then wait until it is pushed into ADSP. Follow these steps:

  1. Log in to the RFSX000.
  2. Navigate to Security > Enhanced Probe/Beacon Table > Probe Table.
  3. Select the Enable Enhanced Probe Table check box.
  4. In the Preferred MUs section, click the Add button.
  5. Enter the MAC address of the MU (Wireless Client) that you want to populate the Probe Request table with data.
  6. Click OK.
  7. Click Apply.
  8. Navigate toNetwork > Access Port Radios.
  9. Double-click on the B/G radio of the AP650.
  10. Select the Enable Enhanced Probe Table check box.
  11. Click Apply.
  12. Repeat Step 9, Step 10, and Step 11 for the A radio.
  13. Restart the controller.
9037079-00