To view a sensor profile:
icon next to the
profile that you wish to view.
The profile opens in a dialog.
For each profile, the following information is displayed.
| Field | Description |
|---|---|
| Sensor Profile Name | The sensor profile's name. |
| Primary Appliance | The IP address for the primary AirDefense appliance. This is the IP address of the AirDefense server which sensors will attempt connecting to first. |
| Secondary Appliance | The IP address for the secondary AirDefense appliance. This is the IP address of the AirDefense server, which sensors will try connecting to, if the attempt to connect to the Primary Appliance fails. |
| Tertiary Appliance | The IP address for the tertiary AirDefense appliance. This is the IP address of the AirDefense server, which sensors will try connecting to, when attempts to connect to the Primary Appliance and the Secondary Appliance fail. |
| Link Speed | The link speed for the Ethernet interface. This value can be one of auto negotiate (default), 10Mbps (Full Duplex or Half Duplex), or 100Mbps (Full Duplex or Half Duplex). |
| MTU | The Maximum Transmission Unit value for your interface. |
| Prevent Auto Adoption | Displays a green check mark when enabled. Displays a red 'x' mark when disabled. When enabled, auto adoption of sensors is prevented. |