Configure AirDefense

The ADSPadmin Config program area provides the following utilities for configuring AirDefense:

• IDS—Use this item to enable or disable SSLv3 support, Fast Termination, and MAC Spoof detection settings on the AirDefense appliance. These settings are required for AirDefense to work properly with some legacy systems.
• IP—use this to change the IP address, subnet mask, and default gateway of the AirDefense appliance.
• IPv6—use this to change the IPv6 address of the AirDefense appliance.
• NETPORT—use this to change network interface settings, and to toggle Auto-negotiation on and off.
• DNS—use this to add or delete a DNS name server (Domain Name Server).
• BONDING—use this to enable the High Availability Ethernet.
• HNAME—use this to change the name of the AirDefense appliance.
• DNAME—use this to change the domain to which the AirDefense appliance belongs.
• TIME—use this to configure the AirDefense appliances operating time and date.
• TZ—use this to configure the time zone in which the AirDefense appliance operates.
• NTP—use this to configure a specific network time server, instead of setting TIME and TZ.
• PING—use this to enable or disable ICMP echo request responses.
• SNMPA—use this to enable or disable reception SNMP agent requests.
• SNMPC—use this to configure SNMP agent community string.
• SNMPT—use this to enable or disable SNMP trap reception.
• HTTP—use this to enable or disable unencrypted Sensor connections.
• PANIC—use this to enable or disable reboot on a system error.
• UIPORT—use this to display the network port you are using for the GUI.
• SSlv3—use this to configure SSL version 3 support.