These icons indicate the state of a sensor:
|
Icon |
Description |
|---|---|
  |
A Sensor that is functioning normally and is communicating with the AirDefense Server. To be online, the Sensor must be connected to the AirDefense Server. |
 |
A Sensor that is not communicating with the AirDefense Server. If you did not intentionally take a Sensor off-line, check the Sensor's configuration settings. |
 |
A Sensor that is not licensed with the AirDefense Server. Use the Licenses feature of the Appliance Manager to check the license status. |
 |
A Sensor that is in the auto-connect mode. Note: The
Sensor auto-connect mode is the fourth phase of zero touch. After 5
minutes of attempting zero touch discovery and an AP is not adopted
by a switch or the default password has been changed, a Sensor will
enter the auto-connect mode and attempt to connect the AP to the
AirDefense appliance.
|
 |
A planned Sensor as seen in adding planned devices to a floor plan. |
 |
A Sensor that is in radio share mode. Note: If the
Sensor appears in a Java applet (standalone feature) and is in radio
share mode, the ap_radioShare icon displays (not a Sensor
icon).
|
 |
A Sensor that is in radio share mode and is not communicating with the AirDefense Server. If you did not intentionally take the Sensor off-line, check the Sensor's configuration settings. |