Channel Settings

Use Channel Settings to select power and channel settings for the B/N/G radio and the A/N radio. The settings are applied to APs and wireless switches.

By default, Channel Settings are enabled, and are set for maximum power and automatic channel selection. The configuration fields for each radio are:

Setting Description

Power (dBM)

Enter the maximum power value (in dBm) that APs and wireless switches must have. Default setting is 20 dBm.

Channel Selection

Select one of three options:

  • Automatic—ADSP automatically sets which channel is used.
  • Manual—Select a channel to use from the drop-down menu and then select the extension range (none, upper, or lower).
  • Random—ADSP randomly sets the channel

Default setting is Automatic.
9037079-00