Add System Log Server IP Address

To add an external system log server to record activities performed directly on your AirDefense instance:

Select the Enable Configurations switch to enable it.

The IP address of the remote system log server can only be entered if the Enable Configurations switch is set to the ON position.

The Syslog Server IP Address field gets enabled. If a System Log server is already configured for receiving activity logs, then this field displays its IP address.
Provide the IP address of the remote system log server in the Syslog Server IP Address field.

The IP address is only verified for proper formatting. AirDefense does not verify that the IP address is of a valid system log server.

If already configured, you can also choose to provide the IP address of your current system log server in this field. This is the server where your Alarm logs are currently being sent.

Note
This field will not accept host names.

Note
You cannot enter multiple IP addresses in this field.
Select the APPLY button to save the information.

On successful registration, activity logs from your AirDefense system is sent to the remote system log server.