The Frame Capture action monitors and analyzes real-time data traffic flow from devices in your wireless LAN and saves the data in a file if the conditions defined in the filter are met
Provide the following Frame Capture configuration information:
| Field | Description |
|---|---|
| Frame Capture | Select the scope of the frame capture. Frame capture can be limited to either Sensor or to Device. |
| Frame Count Limit | Limits the total number of frames to capture for each device category. Use the spinner control to set the value. |
| Time Limit | Specifies a time duration for the Frame Capture to run. Time can be set in number of minutes or hours. Use the appropriate controls to configure this value. |
| File Name Prefix | Specifies the prefix for the frame capture file. This prefix along with a number sequence is used to name your frame capture files. |
| Capture Management Frames | Select to include Management Frames in your frame capture. Use either the slider control or the Truncate After spinner control to set the maximum number of Management Frames that will be captured for this instance of frame capture. Capture Management Frames is selected by default. |
| Capture Control Frames | Select to include Control Frames in your frame capture. Use either the slider control or the Truncate After spinner control to set the maximum number of Control Frames that will be captured for this instance of frame capture. Capture Control Frames is not selected by default. |
| Capture Data Frames | Select to include Data Frames in your frame capture. Use either the slider control or the Truncate After spinner control to set the maximum number of Data Frames that will be captured for this instance of frame capture. Capture Data Frames is selected by default. |
Hover on theFrame Capture box to view a synopsis of its configuration.