This command displays all learned Convergence End Points (CEPs) information.
| port_list | List of ports to show CEPs on. |
| all | Specifies that information for CEPs on all ports should appear. |
N/A
The following example shows CEPs for port 12:
# show policy convergence-endpoint connections ports 12
Convergence End Point Connection Info for port 12 Endpoint Type cisco Policy Index 3 Discovery Time Mon FEB 06 02:31:42 2008 Firmware Version Address Type unknown Endpoint IP unavailable Endpoint MAC 00:04:0d:01:f8:35
This command was first available in ExtremeXOS 22.2.
This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X590, X620, X690, X870 series switches.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB