Removes the configuration that causes VLAN (Virtual LAN) ports to receive the traffic from a multicast group, even if no MLD joins have been received on the port.
| vlan_name | Specifies a VLAN name. |
| port_list | Specifies one or more ports or slots and ports. On a modular switch, it can be a list of slots and ports. On a standalone switch, it can be one or more port numbers. In the form 1, 2, 3-5, 2:5, 2:6-2:8. |
| all | Specifies all multicast groups. |
| v6grpipaddress | Specifies the multicast group IPv6 address. |
N/A.
To add a static group, use the following command:
configure mld snooping {vlan} vlan_name portsport_list add static groupv6grpipaddressThe following example removes a static MLD entry so the multicast group ff02::a:b is not forwarded to VLAN marketing on ports 2:1-2:4, unless an MLD join message is received on the port:
configure mld snooping marketing ports 2:1-2:4 delete static group ff02::a:b
This command was first available in ExtremeXOS 11.2.
This command is available on the platforms listed for the IPv6 multicast routing feature in the ExtremeXOS 22.7 Feature License Requirements document.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB