Clears the inline statistics for the selected port to zero.
| all | Specifies all ports. |
| port_list | Specifies one or more ports or slots and ports. |
N/A.
Use this command to clear all the information displayed by the show inline-power stats ports port_list command.
The following command clears the inline statistics for ports 1–8 on a switch:
clear inline-power stats ports 1-8
The following command displays cleared inline power configuration information for ports 1–8:
show inline-power stats ports 1-8
Following is sample output from this command:
STATISTICS COUNTERS Port State Class Absent InvSig Denied OverCurrent Short 1 delivering class3 0 0 0 0 0 2 delivering class3 0 0 0 0 0 3 searching class0 0 0 0 0 0 4 searching class0 0 0 0 0 0 5 searching class0 0 0 0 0 0 6 searching class0 0 0 0 0 0 7 searching class0 0 0 0 0 0 8 searching class0 0 0 0 0 0
This command was first available in ExtremeXOS 11.1.
This command is available on the PoE (Power over Ethernet) devices listed in PoE section of the ExtremeXOS 22.7 User Guide.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB