Unconfigures, disables one or more DHCP (Dynamic Host Configuration Protocol) trusted ports.
| ports | Specifies one or more trusted ports. |
| all | Specifies all trusted ports. |
N/A.
Use this command to disable one or more DHCP trusted ports.
To display the DHCP snooping configuration settings, including DHCP trusted ports if configured, use the following command:
show ip-security dhcp-snooping {vlan} vlan_nameTo display any violations that occur, including those on DHCP trusted ports if configured, use the following command:
show ip-security dhcp-snooping violations {vlan} vlan_nameThe following command unconfigures ports 2:2 and 2:3 as trusted ports:
unconfigure trusted-ports 2:2-2:3 trust-for dhcp-server
This command was first available in ExtremeXOS 11.6.
This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X590, X620, X690, X870 series switches.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB