create access-list zone

create access-list zone name zone-priority number

Description

Creates a dynamic ACL (Access Control List) zone, and sets the priority of the zone.

name	Specifies the dynamic ACL zone name. The name can be from 1-32 characters long.
zone-priority number	Specifies priority of the zone. The range is from 1 (highest priority) to 4294967295 (lowest priority).

The denial of service, system, and security zones are configured by default, and cannot be deleted.

This command creates a dynamic ACL zone. You can configure the priority of the zone in relation to the default zones or to other configured zones.

The following command creates a new zone, called myzone, with a priority of 2:

create access-list myzone zone-priority 2

This command was first available in ExtremeXOS 11.6.

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X590, X620, X690, X870 series switches.

Published July 2019prev | next