configure ospf add vlan area link-type

configure ospf add vlan vlan-name area area-identifier link-type [auto | broadcast | point-to-point] {passive}

Description

Configures the OSPF (Open Shortest Path First) link type.

Syntax Description

vlan-name Specifies a VLAN (Virtual LAN) name.
area-identifier Specifies the area to which the VLAN is assigned.
auto Specifies to automatically determine the OSPF link type based on the interface type.
broadcast Specifies a broadcast link, such as Ethernet. Routers must elect a DR and a BDR during synchronization.
point-to-point Specifies a point-to-point link type, such as PPP.
passive Specifies to stop sending and receiving packets on this interface.

Default

Auto.

Usage Guidelines

The passive parameter indicates that the router only synchronizes and listens, and does not originate or send any new information on the interface.

Example

The following command configures the OSPF link type as automatic on a VLAN named accounting:

configure ospf add vlan accounting area 0.0.0.1 link-type auto

History

This command was first available in ExtremeXOS 10.1.

Platform Availability

This command is available on platforms with an Advanced Edge or Core license as described in the ExtremeXOS 22.7 Feature License Requirements document.