Displays all the CLEAR-Flow rules on the switch.
This command has no arguments or variables.
N/A.
None.
The following display shows output for the command show clear-flow rule-all:
Policy Name Vlan Name Port Rule Name Last Value OP Threshold TCNT Sec ================================================================================ clearFlow * 2:1 rule-count 1 > 100 0 11 clearFlow * 2:1 rule-delta 1 > 1000 0 11 clearFlow * 2:1 rule-delta 0 > 1000 0 4 clearFlow * 2:1 rule-delta 0 > 20 0 11 clearFlow * 2:1 rule-ratio 0 > 10 0 11 clearFlow * 2:1 rule-ratio 0 > 10 0 4 clearFlow * 2:26 rule-count 9030635 > 100 1 10 clearFlow * 2:26 rule-delta 9030635 > 1000 1 10 clearFlow * 2:26 rule-delta 0 > 1000 0 4 clearFlow * 2:26 rule-delta 0 > 20 0 10 clearFlow * 2:26 rule-ratio 0 > 10 0 10 clearFlow * 2:26 rule-ratio 0 > 10 0 4 clearFlow Default * rule-count 36666439 > 100 1 10 clearFlow Default * rule-delta 36666439 > 1000 1 10 clearFlow Default * rule-delta 0 > 1000 0 4 clearFlow Default * rule-delta 0 > 20 0 10 clearFlow Default * rule-ratio 0 > 10 0 10 clearFlow Default * rule-ratio 0 > 10 0 4 ================================================================================ Total Entries: 18 Notation: TCNT - Number of times expression is continously evaluated to be true Sec - Number of seconds elapsed from last sampled data
This command was first available in ExtremeXOS 11.1.
This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X590, X620, X690, X870 series switches.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB