configure neighbor-discovery cache retransmit-time

configure neighbor-discovery cache {retransmit-time retransmit_time}

Description

Sets the value for Neighbor Discovery Protocol (NDP) retransmit time

retransmit-time	Specifies setting the retransmit time.
retransmit_time	Sets the retransmit time value (range is 1–4,294,967 seconds or 1– 4,294,967,295 milliseconds). The default is 1 second.
milliseconds	When setting the retransmit time value, specifies milliseconds as the time unit (range is 1–4,294,967,295).
seconds	When setting the retransmit time value, specifies seconds (range is 1–4,294,967) as the time unit (default).

The default setting for the retransmit time is 1 second. The default unit of measure is seconds.

The following example sets the retransmit time to 500,000 seconds:

configure neighbor-discovery cache retransmit-time 500000 seconds

This command was first available in ExtremeXOS 11.2.

This command is available on the platforms listed for the IPv6 unicast routing feature in the ExtremeXOS 22.7 Feature License Requirements document.

Published July 2019prev | next