disable bootp vlan

disable bootp {ipv4} | dhcp {ipv4 | ipv6} ] vlan [vlan | all]

Description

Disables the generation and processing of BOOTP packets on a VLAN (Virtual LAN) to obtain an IP address for the VLAN from a BOOTP server.

Syntax Description

bootp Disable BOOTP client.
ipv4 IPv4 client. (default)
dhcp Disable DHCP (Dynamic Host Configuration Protocol) client.
ipv6 IPv6 client.
vlan Specify VLAN to configure BOOTP/DHCP client for.
vlan Specifies a VLAN name.
all Disables all VLANs.

Default

Disabled.

Usage Guidelines

If the IPv4/IPv6 keyword is not specified, IPv4 is taken as default for the mentioned VLAN.

Example

The following example disables the generation and processing of BOOTP packets on a VLAN named accounting:

disable bootp vlan accounting

History

This command was first available in ExtremeXOS 10.1.

The ipv4 and ipv6 keywords were added in ExtremeXOS 15.6.

Platform Availability

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X590, X620, X690, X870 series switches.