Displays the DHCP (Dynamic Host Configuration Protocol) server‘s configuration and address allocation on a specified VLAN (Virtual LAN).
| vlan_name | Specifies the VLAN of the DHCP server of interest. |
N/A.
If no VLAN is specified, the configuration and address allocation for the servers on all the VLANs is displayed.
The following command displays the configuration and address allocation for the DHCP server for the VLAN test:
show dhcp-server vlan test
The following is sample output from this command:
# show dhcp-server VLAN "Default": DHCP Address Range : Not configured Netlogin Lease Timer : Not configured (Default = 10 seconds) DHCP Lease Timer : Not configured (Default = 7200 seconds) DHCP Option Code 12 : hex "11:22:33:44:45" DHCP Option Code 69 : ipaddress 10.0.0.1 10.0.0.2 Ports DHCP Enabled : No ports enabled
This command was first available in ExtremeXOS 11.0.
The output is modified to show primary and secondary DNS servers in ExtremeXOS 12.1.
This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X590, X620, X690, X870 series switches.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB