show igmp snooping cache

This command is provided for backward compatibility. The recommended command is:

show mcast cache {{vlan} name} {{[group grpaddressMask | grpaddressMask] {source sourceIP | sourceIP}} {type [snooping | pim | mvr]}| {summary}}

The syntax for the original form of this command is:

show igmp snooping cache {{vlan} name} {{group} grpaddressMask}

Description

Displays multicast cache entries added by IGMP (Internet Group Management Protocol) snooping for all VLANs and groups. The display can be limited to specific VLANs or groups.

Syntax Description

name Specifies a VLAN (Virtual LAN) name.
grpaddressMask Specifies a multicast group address and mask.

Default

Displays information for all VLANs and groups.

Usage Guidelines

None.

Example

The following command displays IGMP snooping cache information for all VLANs and groups:

show igmp snooping cache

This command display is the same as for the following preferred command:

show mcast cache {{vlan} name} {{[group grpaddressMask |grpaddressMask] {source sourceIP |sourceIP}} {type [snooping | pim | mvr]}| {summary}}

History

This command was first available in ExtremeXOS 10.1.

Platform Availability

This command is available on platforms that support the appropriate license. For complete information about software licensing, including how to obtain and upgrade your license and which licenses support the IGMP snooping feature, see the ExtremeXOS 22.7 Feature License Requirements document.