Displays the current DHCP (Dynamic Host Configuration Protocol)/BOOTP client state for each vlan.
This command has no arguments or variables.
If the IPv4 or IPv6 keyword is not specified, IPv4 is the default.
None.
The following command displays the DHCP/BOOTP status for all VLANs:
show dhcp-client state
Depending on your configurations, output from this command is similar to the following:
Print
this page
Email this topic
Feedback
View PDF
Download EPUB# sh dhcp-client ipv6 state v3
Client VLAN : v3
Client Type : Stateful
Identity Association Type : IA-NA
IA-NA : Identity Association for Non-Temporary
Addresses
Identity Association Identifier : 96:7e:1f:5a
Client IP Address : 2001::550b:ebf8:d0b8:9a8
Client Identifier Type : Link-Layer Address Plus Time
Client Identifier : 00:01:00:01:1a:85:0a:bd:00:04:96:7e:1a:5a:00:00
Server Identifier : 00:01:00:01:13:e0:f4:93:00:11:43:c0:06:50
State : Bound
Identity Association Types:
IA-NA - Identity Association for Non-Temporary Addresses,
IA-TA- Identity Association for Temporary Addresses.
This command was first available in ExtremeXOS 10.1.
This command was modified in ExtremeXOS 15.6 to include the ipv4 and ipv6 keywords.
This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X590, X620, X690, X870 series switches.