configure policy captive-portal

configure policy captive-portal web-redirect redirect_index server server_id {url redirect_url} {status}

Description

This command configures a captive portal server‘s HTTP redirect URL and its status.

web-redirect	Configures web-redirect.
redirect_index	Configures a web redirect index (range = 1–10).
server	Configures a server for the web redirect index.
server_id	Sets the server ID to use ( range = 1–2).
url	Configures captive portal server absolute URL.
redirect_url	Sets HTTP/HTTPS URL that users are redirected to http(s)://<IPv4Address or Hostname>:<L4Port>/<Path> Where IPV4Address or Hostname is the IPv4 address or hostname of the captive portal server (DNS server needs to be configured on the device). L4Port by default is 80. Should be provided with the value on which the captive portal web-server is running.
status	Captive portal server status: "enable" or "disable" (default is disable).

By default, captive portal server status is disabled.

The following example configures and enables the URL for a particular captive portal server (index 2) in web-redirect (index 1):

configure policy captive-portal web-redirect 1 server 2 url http://192.168.1.1:80/static/index.jsp enable

This command was first available in ExtremeXOS 22.3.

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X590, X620, X690, X870 series switches.

Published July 2019prev | next