configure snmpv3 delete notify

configure snmpv3 delete notify [{[[hex hex_notify_name] | notify_name]} | all-non-defaults]

Description

Deletes an entry from the snmpNotifyTable.

Syntax Description

hex_notify_name Specifies the notify name to add. The value is to be supplied as a colon separated string of hex octets.
notify_name Specifies the notify name to add in ASCII format.
all-non-defaults Specifies that all non-default (non-permanent) notifications are to be deleted.

Default

N/A.

Usage Guidelines

Use this command to delete an entry from the snmpNotifyTable. When a notification is to be sent, this table is examined. For the target addresses that have been associated with the tags present in the table, notifications will be sent, based on the filters also associated with the target addresses.

Example

The following command removes the N1 entry from the table:

configure snmpv3 delete notify N1

History

This command was first available in ExtremeXOS 10.1.

The hex_notify_name parameter was added in ExtremeXOS 11.0.

Platform Availability

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X590, X620, X690, X870 series switches.