enable snmp traps bfd

enable snmp traps bfd session down | session-up

Description

This command enables session up/down trap reception for BFD.

Syntax Description

snmp Configure SNMP (Simple Network Management Protocol) specific settings.
traps Configure SNMP Trap generation settings.
bfd BFD-specific traps.
session-down Generate trap when BFD session goes down.
session-up Generate trap when BFD session goes up.

Default

Both session-down and session-up.

Usage Guidelines

Use this command to enable trap reception for BFD session up/down.

Example

The following command will enable trap generation for BFD session down events.

enable snmp traps bfd session-down

History

This command was first available in ExtremeXOS 15.5.

Platform Availability

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X590, X620, X690, X870 series switches.