Displays detailed bridge port extender (BPE) image information for the specified BPE(s).
| vpex | Specifies Virtual Port Extenders (VPEX). |
| bpe | Specifies BPE. |
| slot | Specifies a specific BPE by slot number. |
| slot_num | Specifies a specific BPE by slot number. |
| version detail | Specifies detailed image version information for the specified BPEs. |
N/A.
When an extended slot is configured using MLAG-ID and its peer, the MLAG ID could be associated with a port or it could be a virtual MLAG ID. For slots configured using virtual MLAG, instead of the cascade port, the MLAG ID appears in output of this command.
The following example show detailed image version information for all attached BPEs:
Print
this page
Email this topic
Feedback
View PDF
Download EPUB# show vpex bpe version detail
BPE Version Information
Cascade Port: 1:47 Slot: 100 MAC: d8:84:66:88:98:02
Active-image:
Version: 1.0.0.35
Date: 12-Jun-2017
Time: 11:15:03
MD5 Digest: 2bec22a139c0e0d243d9eed192ce54e4
Inactive-image:
Version: 1.0.0.32
Date: 24-May-2017
Time: 19:07:31
MD5 Digest: 04a0e44f58a9e0810ea16fc034bea462
Cascade Port: 1:45 Slot: 101 MAC: d8:84:66:88:98:05
Active-image:
Version: 1.0.0.35
Date: 12-Jun-2017
Time: 11:15:03
MD5 Digest: 2bec22a139c0e0d243d9eed192ce54e4
Inactive-image:
Version: 1.0.0.32
Date: 24-May-2017
Time: 19:07:31
MD5 Digest: 04a0e44f58a9e0810ea16fc034bea462
This command was first available in ExtremeXOS 22.5.
MLAG ID information added in ExtremeXOS 22.7.
This command is available on the Summit X670-G2 and ExtremeSwitching X690, X590 series switches.