disable access-list refresh blackhole

Description

Disables blackholing of packets during ACL (Access Control List) refresh.

This command has no arguments or variables.

The feature is enabled.

When access control lists (ACLs) are refreshed, this feature provides that any packets arriving during the refresh will be blackholed.

If you disable this feature, the ACLs will be refreshed as described in the refresh policy command.

To enable this feature, use the following command:

enable access-list refresh blackhole

The following command disables dropping of packets during an ACL refresh:

disable access-list refresh blackhole

This command was first available in ExtremeXOS 11.0.

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X590, X620, X690, X870 series switches.

Published July 2019prev | next