Displays information about neighbors in ports.
| port_list | Specifies the port list, separated by a comma. |
| configuration | CDP local port configuration. |
| detail | Detailed information. |
N/A.
Use this command to display CDP port information.
The following command displays neighbor port information on the CDP feature:
Print
this page
Email this topic
Feedback
View PDF
Download EPUB# show cdp ports
Neighbor Information--------------------
Port Device-Id Hold time Remote CDP Port ID
Version
---- --------- --------- ---------- --------------------
1 Eni-Extreme-x440-sw> 149 Version-1 Slot: 1, Port: 1
2 00:04:96:8B:9D:B0 160 Version-2 Slot: 1, Port: 2
7 00:04:96:8B:C1:ED 138 Version-2 Slot: 1, Port: 7
Note
">" indicates that the value was truncated to the column size in the output.Local Port Information
----------------------
Port Trust Cos VoIP VLAN VoIP VLAN
Advertise
---- ---------- ---- ------------------------------- ------------
1 Trusted 0 Default Solicited
2 Trusted 0 Default Unsolicited
# show cdp port 10 detail
Neighbor Information
--------------------
Device ID : X670G2-48x-4q
Port ID (outgoing port) : Slot: 1, Port: 10
Advertisement Version : 2
Platform : X670G2-48x-4q
Interface : 10
Holdtime : 162
Version :
ExtremeXOS version 22.4.0.5 xos_22.4 by kosharma
on Fri Jul 14 12:28:36 IST 2017
Native VLAN : 1
Duplex : Full
Trust : Trusted
SysName : X670G2-48x-4q
This command was first available in ExtremeXOS 15.4.
The output of this command was updated in ExtremeXOS 21.1.
The detailoption was added and the output of this command was updated in ExtremeXOS 22.5.
This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X590, X620, X690, X870 series switches.