configure vrrp vlan vrid priority

configure vrrp vlan [vlan_name | vlan_list] vrid [vridval | vrid_list] priority priorityval

Description

Configures the priority value of a VRRP (Virtual Router Redundancy Protocol) router instance.

Syntax Description

vlan_name

Specifies the name of a VRRP VLAN (Virtual LAN).

vlan_list VLAN list (1–4,094).
vridval

Specifies the VRID for the VRRP instance. To display the configured VRRP router instances, enter the show vrrp command.

vrid_list List of virtual router IDs (1–255).
priorityval

Specifies the priority value of the router. The default is 100. The priority range is 1-255.

Default

The default priority is 100.

Usage Guidelines

This command changes the priority of a VRRP router. If the VRRP router is the IP address owner (which means that the VRRP router IP address matches the VRRP VLAN IP address), the priority is 255 and cannot be changed. If the VRRP router is not the IP address owner, the priority can be changed to values in the range of 1 to 254.

To change the priority of the IP address owner or to make a different VRRP router the IP address owner, disable VRRP and reconfigure the affected switches to use VRRP router addresses that support the priorities you want to assign.

Example

The following command configures a priority of 150 for VLAN vrrp-1:

configure vrrp vlan vrrp-1 vrid 1 priority 150

History

This command was first available in ExtremeXOS 10.1.

VLAN and VR list options added in ExtremeXOS 22.3.

Platform Availability

This command is available on platforms that support the appropriate license. For complete information about software licensing, including how to obtain and upgrade your license and which licenses support the VRRP feature, see the ExtremeXOS 22.7 Feature License Requirements document.